The article was successfully added.
ZT piston Ø38.72 1 ring - for Simson S51, KR51/2 Schwalbe, SR50
DHL standard shipping2:
Delivery time: 1 - 4 workdays.
Delivery time: 1 - 4 workdays.
DHL Express shipping3 (subject to surcharge):
Heute bis 14:30 Uhr per Express mit Samstagszustellung bestellen, garantierte Lieferung Samstag, den 27.04.20242.
Heute bis 14:30 Uhr per Express mit Samstagszustellung bestellen, garantierte Lieferung Samstag, den 27.04.20242.
- State: New
- Brand: ZT-Tuning
- Part number: 10066968
- EAN: 4052309266027
- Notice: Modification acceptance required
Article characteristics
| Ausführung: | Tuning |
| Hubraum in ccm: | 50 |
| Flächen für Anlaufscheiben: | unbearbeitet |
| Anzahl Kolbenringe: | 1 |
| passend für Fahrzeugtyp: | KR51/2 Schwalbe, S51, S53, SR50 |
| Durchmesser in mm: | 38,72 |
| Baugruppe: | Motor & -teile |
| passend für Fahrzeughersteller: | Simson |
| Shipping weight: | 0,094 kg |
Description
ZT-piston Ø38,72 1-Ring - for Simson S51, KR51/2 Schwalbe, SR50
- The respective piston dimension and lettering "ZT-Tuning" are engraved in the piston-
compression dimension identical Simson S51, therefore NOTHING must be changed on the cylinder-
perfectly adapted to the conditions in the air-cooled Simson engine-
steel ring with coating-
ground contact surface for thrust washers-
piston pin weight optimized-
Made by one of the most renowned piston manufacturers in Europe-
total weight approx. 80g-
Dimensions in mm (see picture) :
A: 38,72B:
31C:
50D
: centered over inletE:
34,5
F: 30G:
15,2Advantages
:
- Piston geometry adapted for highest load-
ideal for tuning cylinders-
also suitable for series cylinders-
lighter than series pistons-
surfaces for thrust
washers machined-
for use of original thrust washers (1mm)-
original compression dimension-
no turning of the cylinder necessary-
34mm wide inlet skirt, therefore also suitable for MS 50 cylinders-
extremely stable and high-quality aluminum alloy-
lower friction-
lower wear-
piston ring joint centered over inlet
- The respective piston dimension and lettering "ZT-Tuning" are engraved in the piston-
compression dimension identical Simson S51, therefore NOTHING must be changed on the cylinder-
perfectly adapted to the conditions in the air-cooled Simson engine-
steel ring with coating-
ground contact surface for thrust washers-
piston pin weight optimized-
Made by one of the most renowned piston manufacturers in Europe-
total weight approx. 80g-
Dimensions in mm (see picture) :
A: 38,72B:
31C:
50D
: centered over inletE:
34,5
F: 30G:
15,2Advantages
:
- Piston geometry adapted for highest load-
ideal for tuning cylinders-
also suitable for series cylinders-
lighter than series pistons-
surfaces for thrust
washers machined-
for use of original thrust washers (1mm)-
original compression dimension-
no turning of the cylinder necessary-
34mm wide inlet skirt, therefore also suitable for MS 50 cylinders-
extremely stable and high-quality aluminum alloy-
lower friction-
lower wear-
piston ring joint centered over inlet
Notes
Use in public road traffic will invalidate the operating permit of your vehicle! It may be possible to obtain an individual approval for registration in the vehicle documents.
Customer reviews
Immediately available
Brand: MZA
Item no.: 10002014
€8.39
Exploded views
| Manufacturer | Model series | Model | Drawing | Position | |
|---|---|---|---|---|---|
| Simson | S-Reihe | S51 | Zylinder - Kolben 50ccm | 11 | Open drawing |
| Simson | S-Reihe | S53 | Zylinder - Kolben 50ccm | 11 | Open drawing |
| Simson | S-Reihe | S53 | Zylinder - Kolben 60ccm | 11 | Open drawing |
| Simson | SR50-Reihe | SR50 | Zylinder - Kolben 50ccm | 11 | Open drawing |
| Simson | Schwalbe-Reihe | KR51/2 Schwalbe | Zylinder - Kolben 50ccm | 11 | Open drawing |
| Simson | DUO-Reihe | Duo 4/2 | Zylinder - Kolben 50ccm | 11 | Open drawing |
| Simson | weitere Modelle | MS50 | Zylinder - Kolben 50ccm | 11 | Open drawing |
| Simson | weitere Modelle | SD 25/50 | Zylinder - Kolben 50ccm | 11 | Open drawing |