The article was successfully added.
Set: repair taillight cap, 2 screws fastening - Simson S50, KR51/2 Schwalbe
Letter dispatch:
For delivery addresses within Germany this article can be sent by letter at a reasonable price.
Delivery time: 1 - 4 workdays.
For delivery addresses within Germany this article can be sent by letter at a reasonable price.
Delivery time: 1 - 4 workdays.
DHL Express shipping3 (subject to surcharge):
Heute bis 14:30 Uhr per Express bestellen, garantierte Lieferung Freitag, den 10.05.20242.
Heute bis 14:30 Uhr per Express bestellen, garantierte Lieferung Freitag, den 10.05.20242.
- State: New
- Brand: AKF
- Part number: 10069982
- EAN: 4052309305290
- Notice: Please note the description
Article characteristics
| Material: | Kunststoff |
| Farbe1: | Rot |
| passend für Fahrzeugtyp: | KR51/2 Schwalbe, S50 |
| Baugruppe: | Beleuchtung |
| passend für Fahrzeughersteller: | Simson |
| Shipping weight: | 0,005 kg |
Description
Set: Repair tail light cap
- ideal to save a defective tail light cap-
helps with broken or cracked mounting holes-
the inconspicuous red reinforcement plates cover the defective hole- the cap can be screwed back on sufficiently tight-
for cap with 2 screw mounting, Ø100mmContents
:
- 2x reinforcement plates (3D printed, red)
- 2x cap screw, slotted M4x25
- 2x washer 4,
3- 2x O-ring 3,0 x 2Note
:
The reinforcement plate can also be glued in case of severe damage.
The set can also be installed to prevent damage.
In this article the following components are included:
2x 10070004 AKF reinforcement plate rear light cap, 3D print2x
10060630 DIN cylinder screw, slot M4x25 - DIN842x
10063451 DIN washer 4,3-ST-A4K (DIN 433) - 4,3 x 8 - 0,
52x 10030802 BVF round ring BVF 3 x 2 16N1 - for adjusting screw -
- ideal to save a defective tail light cap-
helps with broken or cracked mounting holes-
the inconspicuous red reinforcement plates cover the defective hole- the cap can be screwed back on sufficiently tight-
for cap with 2 screw mounting, Ø100mmContents
:
- 2x reinforcement plates (3D printed, red)
- 2x cap screw, slotted M4x25
- 2x washer 4,
3- 2x O-ring 3,0 x 2Note
:
The reinforcement plate can also be glued in case of severe damage.
The set can also be installed to prevent damage.
In this article the following components are included:
2x 10070004 AKF reinforcement plate rear light cap, 3D print2x
10060630 DIN cylinder screw, slot M4x25 - DIN842x
10063451 DIN washer 4,3-ST-A4K (DIN 433) - 4,3 x 8 - 0,
52x 10030802 BVF round ring BVF 3 x 2 16N1 - for adjusting screw -
Set
The following components are included in this article:
Customer reviews
Immediately available
Brand: AKF
Item no.: 10070474
€1.54
(Model: S50)
(Model: TS 125)
(Model: S51)
(Model: S70)
(Model: S50)
(Model: S50)
(Model: TS 250)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)