The article was successfully added.
Tuning cylinder kit ZT63N Stage 1 (63ccm) - for Simson KR51/1 Schwalbe, SR4-2 Star, SR4-3 Sperber, SR4-4 Habicht
- State: New
- Brand: ZT-Tuning
- Part number: 10068582
- EAN: 4052309019982
- Notice: Modification acceptance required
-
Notice:
In case of complaints, please note that the installation certificate of a specialist workshop is urgently required.
The manufacturer requires this proof in the event of a complaint in order to be able to exclude installation errors during assembly.
Philipp / 14 Sep 2021
Dieses hochwertige Set sollte mir die Schwalbe etwas spritziger im Anzug machen. Noch bin ich beim Einfahren und kann nichts genaueres über die Endgeschwindigkeit beim...
Article characteristics
Ausführung: | Tuning |
Hubraum in ccm: | 60 |
Einlasskanal in mm: | 21 |
Variante: | 2-Kanal |
Anzahl Kolbenringe: | 2 |
passend für Fahrzeugtyp: | Duo 4/1, KR51/1 Schwalbe, SR4-2 Star, SR4-3 Sperber, SR4-4 Habicht |
Durchmesser in mm: | 45 |
Baugruppe: | Motor & -teile |
passend für Fahrzeughersteller: | Simson |
Shipping weight: | 1,715 kg |
Description
Cylinder kit ZT63N Stage 1
For a long time, there were only very few, more powerful cylinders for the KR51/1. This is due on the one hand to an unfavorable channel guidance, on the other hand, you quickly come up against the thermal load limit, especially with more powerful kits. With only 2 oversize pistons, there were also narrow limits to the longevity of such cast iron cylinders.
The heat sink and the liner are made of a high quality cast aluminum. The liner is coated in a special process, which makes it extremely robust and provides optimum protection against wear.
The thermal conductivity is also significantly higher than a cylinder version with cast iron liner. In addition, heat dissipation is further improved by a blasted, slightly rough surface.
Thus, the 2 core problems could already be eliminated by using new technologies.
The timing and channel cross-sections have been designed for high torque from the rev range and wide power band to harmonize perfectly with the 3 speed transmission. Thus, the drivability from the speed cellar is absolutely identical to our "old tuning cylinders". In addition, however, the power in the middle and upper speed range could be significantly increased, which in the end result allows a power band and power development, which is otherwise unmatched in this class.
Features:
- Original optic cylinder with coated aluminum bushing-
High quality material for heat sink and liner-
Improved heat dissipation due to finely blasted surface and coated aluminum bushing-
Long durability approx. 10 TKm per piston, several oversizes are available)
- Vmax 80-90 km/h-
approx.
8,5HPScope of supply
:
- ZT63N cylinder-
ZT63 cylinder head-
ZT 2-ring piston Ø45 mm incl. rings, bolts & clips-
carburetor flange gasket-
2x cylinder base gasket-
2x carburetor flange stud
boltsOnly Motul 800 2T Road Racing may be used as mixing oil!
Use rubber buffers (10070259) when mounting the exhaust! In case of rigid mounting breakage of manifold thread possible!
For a long time, there were only very few, more powerful cylinders for the KR51/1. This is due on the one hand to an unfavorable channel guidance, on the other hand, you quickly come up against the thermal load limit, especially with more powerful kits. With only 2 oversize pistons, there were also narrow limits to the longevity of such cast iron cylinders.
The heat sink and the liner are made of a high quality cast aluminum. The liner is coated in a special process, which makes it extremely robust and provides optimum protection against wear.
The thermal conductivity is also significantly higher than a cylinder version with cast iron liner. In addition, heat dissipation is further improved by a blasted, slightly rough surface.
Thus, the 2 core problems could already be eliminated by using new technologies.
The timing and channel cross-sections have been designed for high torque from the rev range and wide power band to harmonize perfectly with the 3 speed transmission. Thus, the drivability from the speed cellar is absolutely identical to our "old tuning cylinders". In addition, however, the power in the middle and upper speed range could be significantly increased, which in the end result allows a power band and power development, which is otherwise unmatched in this class.
Features:
- Original optic cylinder with coated aluminum bushing-
High quality material for heat sink and liner-
Improved heat dissipation due to finely blasted surface and coated aluminum bushing-
Long durability approx. 10 TKm per piston, several oversizes are available)
- Vmax 80-90 km/h-
approx.
8,5HPScope of supply
:
- ZT63N cylinder-
ZT63 cylinder head-
ZT 2-ring piston Ø45 mm incl. rings, bolts & clips-
carburetor flange gasket-
2x cylinder base gasket-
2x carburetor flange stud
boltsOnly Motul 800 2T Road Racing may be used as mixing oil!
Use rubber buffers (10070259) when mounting the exhaust! In case of rigid mounting breakage of manifold thread possible!
Notes
Use in public road traffic will invalidate the operating permit of your vehicle! It may be possible to obtain an individual approval for registration in the vehicle documents.
Customer reviews
Rate the purchased item now and get up to
170 AKF bonus points. In the menu item
Reviews
menu item in your customer account, you will find all the items for which you can submit a rating.
Quality
64 Reviews
Accuracy of fit
64 Reviews
Price / Performance
64 Reviews
Expectations met
64 Reviews
Recommendation
64 Reviews
(64)
∅ 4.93 being based on 64 Reviews
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Stars
Click to filter
TOP
Immediately available
Modification acceptance required
BVF Tuning carburettor 19N1-12 - Simson KR51 Schwalbe, SR50, SR80
Brand: BVF
Item no.: 10002698
€47.77
Item not available
Modification acceptance required
ZT Upgrade Kit for original carburetor 16mm BVF - for Simson
Brand: ZT-Tuning
Item no.: 10068569
€20.47
Item not available
Modification acceptance required
ZT Upgrade Kit for original carburetor 19mm BVF - for Simson
Brand: ZT-Tuning
Item no.: 10068570
€20.47
Immediately available
Brand: MZA
Item no.: 10002014
€8.39
Immediately available
Immediately available
Modification acceptance required
Clutch kit tuning M53/M54 - for Simson S50, KR51/1 Schwalbe, SR4-2 Star, SR4-3 Sperber, SR4-4 Habicht
Brand: AKF
Item no.: GP10000706
€36.90
Immediately available
Immediately available
(Model: KR51/1 Schwalbe)
(Model: SR4-2 Star)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: Duo 4/1)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: S51)
(Model: SR4-4 Habicht)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: SR4-2 Star)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)