The article was successfully added.
Tuning cylinder kit ZT85G Stage 1 (85cc) - for Simson S51, S53, KR51/2 Schwalbe
- State: New
- Brand: ZT-Tuning
- Part number: 10069449
- EAN: 4052309299674
- Notice: Modification acceptance required
-
Notice:
In case of complaints, please note that the installation certificate of a specialist workshop is urgently required.
The manufacturer requires this proof in the event of a complaint in order to be able to exclude installation errors during assembly.
Anke / 2 Jan 2021
Der Zylinder lässt sich sehr gut fahren. An Bergen gibt es keine Probleme, die bewältigt er extrem einfach und schnell.
Article characteristics
Ausführung: | Tuning |
Hubraum in ccm: | 85 |
Einlasskanal in mm: | 21 |
Variante: | 2-Kanal |
Anzahl Kolbenringe: | 1 |
passend für Fahrzeugtyp: | KR51/2 Schwalbe, MS50, S51, S53, S70, S83, SR50, SR80 |
Durchmesser in mm: | 49,00 |
Baugruppe: | Motor & -teile |
passend für Fahrzeughersteller: | Simson |
Shipping weight: | 2,798 kg |
Description
Cylinder Kit ZT85G Generation 2 - Stage 1
The 2nd generation of the ZT85G represents a completely new development. To achieve a significant improvement over the old variant, all channels (intake, exhaust and overflow) have been significantly revised.
The result is a substantial increase in torque, especially in the lower and medium speed ranges. The usable rpm band is now significantly wider than in the previous version.
The centered cylinder head and the center web in the intake have been adopted from the "big brother" ZT90N GEN2. The centered cylinder head simplifies assembly and ensures the correct position on the cylinder.
During development, particular attention was paid to high torque in the mid-range and to increasing stability.
The latter is helped by the optimized casting process, which on the one hand avoids "settling" of the liner and at the same time maximizes heat dissipation to the aluminum body. Both factors contribute significantly to the increase in durability.
Features:
- Absolute original look (externally hardly distinguishable from the original DDR cylinder)
- outlet Ø 25mm, inlet Ø 21.5mm-
centered cylinder head ---> easy installation-
maximum heat dissipation due to finely blasted surface and optimized casting process-
long durability (up to 15TKM per piston, 8 oversize available)
- Vmax: 95-100Km/h
- designed for 44mm stroke-
piston diameter 49mm-
outer diameter liner: 54mmPower ratings:
- 13.5hp with AOA3 2019
- 12.5hp with AOA1Scope of supply
:
- ZT85G GEN2 Stage 1 cylinder
- ZT85G cylinder head centered-
ZT85G piston GEN2 (1-ring, 48mm shirt length, 49mm diameter)
-
Carburetor flange gasket-
Cylinder base gasket 0.3mm- Cylinder base gasket
0.5mm-
Carburetor flange studs-
2 hardened thrust washers
The 2nd generation of the ZT85G represents a completely new development. To achieve a significant improvement over the old variant, all channels (intake, exhaust and overflow) have been significantly revised.
The result is a substantial increase in torque, especially in the lower and medium speed ranges. The usable rpm band is now significantly wider than in the previous version.
The centered cylinder head and the center web in the intake have been adopted from the "big brother" ZT90N GEN2. The centered cylinder head simplifies assembly and ensures the correct position on the cylinder.
During development, particular attention was paid to high torque in the mid-range and to increasing stability.
The latter is helped by the optimized casting process, which on the one hand avoids "settling" of the liner and at the same time maximizes heat dissipation to the aluminum body. Both factors contribute significantly to the increase in durability.
Features:
- Absolute original look (externally hardly distinguishable from the original DDR cylinder)
- outlet Ø 25mm, inlet Ø 21.5mm-
centered cylinder head ---> easy installation-
maximum heat dissipation due to finely blasted surface and optimized casting process-
long durability (up to 15TKM per piston, 8 oversize available)
- Vmax: 95-100Km/h
- designed for 44mm stroke-
piston diameter 49mm-
outer diameter liner: 54mmPower ratings:
- 13.5hp with AOA3 2019
- 12.5hp with AOA1Scope of supply
:
- ZT85G GEN2 Stage 1 cylinder
- ZT85G cylinder head centered-
ZT85G piston GEN2 (1-ring, 48mm shirt length, 49mm diameter)
-
Carburetor flange gasket-
Cylinder base gasket 0.3mm- Cylinder base gasket
0.5mm-
Carburetor flange studs-
2 hardened thrust washers
Notes
Use in public road traffic will invalidate the operating permit of your vehicle! It may be possible to obtain an individual approval for registration in the vehicle documents.
Customer reviews
Rate the purchased item now and get up to
170 AKF bonus points. In the menu item
Reviews
menu item in your customer account, you will find all the items for which you can submit a rating.
Quality
5 Reviews
Accuracy of fit
5 Reviews
Price / Performance
5 Reviews
Expectations met
5 Reviews
Recommendation
5 Reviews
(5)
∅ 4.8 being based on 5 Reviews
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Stars
Click to filter
Immediately available
Modification acceptance required
BVF racing carburetor 21N1-11 - Simson S51, S53, S70, S83
Brand: BVF
Item no.: 10066711
€46.71
Immediately available
Brand: ZT-Tuning
Item no.: 10068430
€89.76
Item not available
Modification acceptance required
BigBore crankshaft reinforced - for Simson S51, KR51/2 Schwalbe, SR50, MS50
Brand: ZT-Tuning
Item no.: 10068565
€99.95
Item not available
Modification acceptance required
Tuning exhaust AOA2 with dome - for Simson S50, S51, S70
Brand: K-Racing
Item no.: 10068671
€163.98
Item not available
Modification acceptance required
Tuning exhaust AOA3 with dome - for Simson S50, S51, S70
Brand: K-Racing
Item no.: 10068676
€168.95
TOP
Item not available
Modification acceptance required
Tuning exhaust SET 32mm original optics Simson S51, S50 standard
Brand: AKF
Item no.: GP10000004
€157.26
Immediately available
Modification acceptance required
Tuning exhaust ZT-Reso 2019 (50 - 110cc) - for Simson S50, S51, S53, S70, S83
Brand: ZT-Tuning
Item no.: 10069242
€123.06
(Model: S51)
(Model: S51)
(Model: Not specified)
(Model: Not specified)