The article was successfully added.
Gasket set from Kautasit engine type M53/2, flange gasket Ø 19mm - for Simson S50, Schwalbe KR51/1
DHL standard shipping2:
Delivery time: 1 - 4 workdays.
Delivery time: 1 - 4 workdays.
DHL Express shipping3 (subject to surcharge):
Heute bis 14:30 Uhr per Express bestellen, garantierte Lieferung Freitag, den 03.05.20242.
Heute bis 14:30 Uhr per Express bestellen, garantierte Lieferung Freitag, den 03.05.20242.
- State: New
- Brand: AKF
- Part number: GP10000575
- EAN: 4052309059551
Article characteristics
| passend für Fahrzeugtyp: | KR51/1 Schwalbe, S50 |
| Baugruppe: | Motor & -teile |
| Material: | Kautasit |
| passend für Fahrzeughersteller: | Simson |
| Shipping weight: | 0,064 kg |
Description
Gasket set from Kautasit engine type M53/2, flange gasket Ø 19mm - for Simson S50, Schwalbe KR51/1
- Material: Kautasit AF400-
AF 400 is a non-asbestos gasket material based on aramid fiber-
Material thickness: 0.5mm/2.0mm-
Product properties of Kautasit AF400:
- Compressibility/compression 7-14%-
Springback less than 50%-
Gas permeability less than 0.05 mg/(s*m)
- Temperature
resistant up to 250C°-
Oil, gasoline, acids resistant-
Leaky & dripping engines are a thing of the past with Kautasit-
Highest fitting accuracy-
Manufactured according to newly created design drawing, no comparison to other gaskets-
Quality, which has already proven your excellent properties in GDR times-
No comparison to paper or cardboard gaskets
Included in the set:
- Clutch cover gasket 0.5mm-
Engine center gasket 0.5mm- Gasket
for sealing cap crankshaft 0.5mm- Gasket for sealing cap
output shaft 0.5mm- Gasket for sealing
cap clutch cover 0.5mm-
Foot gasket 0.5mm-
Insulating flange gasket Ø19mm in 2.0mmNote
: With the introduction of the S50 in 1975 and the associated engine type M53/2 also got the KR51/1 the new design without rubber mountings on the engine suspension.
With a certain transition period, however, the engine case type M53/1 was still used. This gasket set contains the engine center gasket for the M53/2 (two undamped engine mounts at the rear).
Note: Engine case/clutch cover not included in deliveryIn
this set the following components are included:
1x 10069210 AKF gasket set from Kautasit engine type M53/2 - for Simson S50, Schwalbe KR51/11x
10069215 AKF insulating flange gasket from Kautasit 2,0mm strong, 19mm passage
- Material: Kautasit AF400-
AF 400 is a non-asbestos gasket material based on aramid fiber-
Material thickness: 0.5mm/2.0mm-
Product properties of Kautasit AF400:
- Compressibility/compression 7-14%-
Springback less than 50%-
Gas permeability less than 0.05 mg/(s*m)
- Temperature
resistant up to 250C°-
Oil, gasoline, acids resistant-
Leaky & dripping engines are a thing of the past with Kautasit-
Highest fitting accuracy-
Manufactured according to newly created design drawing, no comparison to other gaskets-
Quality, which has already proven your excellent properties in GDR times-
No comparison to paper or cardboard gaskets
Included in the set:
- Clutch cover gasket 0.5mm-
Engine center gasket 0.5mm- Gasket
for sealing cap crankshaft 0.5mm- Gasket for sealing cap
output shaft 0.5mm- Gasket for sealing
cap clutch cover 0.5mm-
Foot gasket 0.5mm-
Insulating flange gasket Ø19mm in 2.0mmNote
: With the introduction of the S50 in 1975 and the associated engine type M53/2 also got the KR51/1 the new design without rubber mountings on the engine suspension.
With a certain transition period, however, the engine case type M53/1 was still used. This gasket set contains the engine center gasket for the M53/2 (two undamped engine mounts at the rear).
Note: Engine case/clutch cover not included in deliveryIn
this set the following components are included:
1x 10069210 AKF gasket set from Kautasit engine type M53/2 - for Simson S50, Schwalbe KR51/11x
10069215 AKF insulating flange gasket from Kautasit 2,0mm strong, 19mm passage
Set
The following components are included in this article:
Customer reviews
Immediately available
Brand: AKF
Item no.: 10068888
€35.27
Immediately available
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: KR51/1 Schwalbe)
(Model: Not specified)
(Model: Not specified)
(Model: Not specified)
AKF's response:
Hallo Ottokar,
vermutlich benötigst du den Dichtungssatz für den M53/1 Motor