LT 2-ring piston LTP-A Ø41,45 - for Simson S51, KR51/2 Schwalbe, SR50 von LangTuning

LT 2-ring piston LTP-A Ø41,45 - for Simson S51, KR51/2 Schwalbe, SR50, Item no: 10072755 - Image 1

LT 2-ring piston LTP-A Ø41,45 - for Simson S51, KR51/2 Schwalbe, SR50, Item no: 10072755 - Image 2

LT 2-ring piston LTP-A Ø41,45 - for Simson S51, KR51/2 Schwalbe, SR50, Item no: 10072755 - Image 3

LT 2-ring piston LTP-A Ø41,45 - for Simson S51, KR51/2 Schwalbe, SR50

€50.00

incl. VAT.⁵, incl. Shipping

Immediately available

DHL standard shipping2:
Delivery time: 1 - 4 workdays.

DHL Express shipping3 (subject to surcharge):
Heute bis 14:30 Uhr per Express bestellen, garantierte Lieferung Dienstag, den 30.04.2024².

Brand: LangTuning
Part number: 10072755
EAN: 4052309327247
Notice: Modification acceptance required

Ausführung:	Tuning
Hubraum in ccm:	60
Flächen für Anlaufscheiben:	unbearbeitet
Anzahl Kolbenringe:	2
passend für Fahrzeugtyp:	KR51/2 Schwalbe, S51, S53, SR50
Baugruppe:	Motor & -teile
passend für Fahrzeughersteller:	Simson
Durchmesser in mm:	41,45
Shipping weight:	0,101 kg

LangTuning LTP-A piston 41.45mm

The LTP-A pistons are completely new designed and optimized in all points directly for Simson cylinders.

- Extremely light
- the lightest pistons for Simson on the market-
Extremely resilient: the internal geometry of the piston and the alloy provide stability-
Very wide piston skirt at the inlet: Good piston guidance even with very wide inlet ports

-

With piston window: Thanks to the window better cooling of the piston crown and additional filling of the overflow-
Clamp-free: Very precise piston geometry specially matched to the thermal expansion for air-cooled cylinders-
Rattle-free: High-quality 1 mm steel rings in precisely manufactured piston ring grooves-
LTP-A 2-ring piston for series and sports cylind
ers-

LTP-A 1-ring piston for tuning and racing cylindersGeometry-

A Diameter: 41.45mm-
B Length: 50 mm (like original Simson S51 and Co.)
- C Compression dimension: 31 mm (like original Simson S51 and Co

.

)
- D Ring butt distance: 2 mm-
E Ring butt distance: 2 mm-
F Distance between thrust surfaces: 15.5 mm (suitable for 1 mm thrust washers)

-

G Diameter piston pin: 12 mm

-

H Width piston skirt inlet: 37 mm-
I Width piston skirt outlet: 31 mmWeight

piston

(basic size): only 69 gWeight

piston

incl. Bolts, rings, clips (basic size): only 88 g

Scope of delivery-
LTP-A piston

- Piston

pin-

Piston

rings-

Piston

clipsNote

:

LT KnowHowLangtuning
designed the LTP-A pistons from scratch itself

.

Usually in the Simson market, only the external geometry such as length, diameter, etc. are submitted to the manufacturer and the manufacturer makes a piston mold. These molds usually have a high material thickness and thus the piston is correspondingly heavy.

Langtuning goes new ways with the construction of the LTP-A pistons.
This is of course much more complex and requires appropriate experience.
But as a result, the piston weight is on average 10% lower than usual pistons in the quality price segment and about 20% lower than inexpensive series pistons.
At the same time, depending on the size, the pistons could be reinforced by an appropriate strut design, so that they are not only lighter, but also more stable.

The LTP-A pistons are optimized for slotted Simson cylinders. Due to an extra wide intake skirt, very wide intake ports for tuning cylinders are also possible. At the same time, the LTP-A pistons are also suitable for series cylinders and can be used without any problems. The piston windows are placed so that there is no short circuit with the intake or secondary outlets.

Use in public road traffic will invalidate the operating permit of your vehicle! It may be possible to obtain an individual approval for registration in the vehicle documents.