B-Ware - Set: ZT-Tuning Telefork Silver, for disc brakes, with parts certificate - for Simson S50, S51, S70, S53, S83

B-Ware - Set: ZT-Tuning Telefork for disc brakes - Mounting and usage traces - Color: Silver - Without part certificate - Consecutive number plate: ZT-Tuning 1706 - * - ****** - based on the original Simson Telephone fork for disc brakes - very good damping properties, with high driving comfort at the same time - the inside completely revised damper - screwed opening at the top - spring preload adjustable over the length of the pretensioning sleeve - bore cross sections for the pull and compression damping - fitting for Simson brake caliper (Grimeca) - travel approx. 125mm - hydraulic end stop, the fork is completely prevented - total length approx. 71cm (short version) - standpipe Ø30.00 mm The following vehicles are Listed in the parts certificate: - S50N, S50B, S50B1, S50B2 - S51N, S51B1-3, S51B1-4, S51B2-4, S51E, S51C - S53, S53M - S70C, S70E - S83 - MS50 Note: The telescopic fork can be opened from above (in the installed state) without any problems and the preload sleeve can be removed and, if necessary, a longer or shorter sleeve can be installed to adjust the preload. Thus, depending on the weight or desired hardness, each driver can adjust the telescopic fork according to his preferences. The fork is filled with a very thin oil when delivered to achieve a good compromise between comfort and cushioning. A slightly thicker oil can be selected for racing operation and, if necessary, the preload sleeve can be selected a little longer. With these measures, the fork is also absolutely suitable for racetracks. Use of the original drum brake is not possible!