Race ignition ignition Delta 25 M20 - for MZ ES/TS125/150/250

Race ignition ignition Delta 25 M20 - for MZ ES/TS125/150/250 - digital racing ignition with pre-programmed ignition curves - all RZT ignition curves in a single ECU which at the touch of a button can be selected - ideal if several engines are available or it is not clear exactly which ignition curve brings the optimal performance. - 5 near-series ignition curves 4.1 to 8.1, ideal for original and tame machined engines - 13 ignition curves, 50.4 to 110.4, for more tuned engines - 2 ignition curves for 4-stroke, 4T1 and 4T2, for AWO etc - with ignition angle correction from -2° via switch position 2, possible during the journey - 11 pre-programmed soft limiters between 4000 and 9000 rpm - 18 Pre-programmed hard limiter between 5000 and 13500 rpm - HART limiter function can also be used as a pit limiter or launch control - the M20 has a switch position 3 as a signal output with a 12V control signal up to 2A power - single-built stator, only one power supply circuit - external pickup sensor, which provides a clear signal for a digital ECU - designed for tuning motors up to approx. 15,000 rpm - ready for installation incl. plugs, etc. - light output For H4 lighting + secondary consumer - with DC controller 12V/90W/7.5A - 12V threshold is exceeded with 70W consumers at around 4000 rpm - Rotor: Diameter 77mm, weight 640g (130g lighter than a vape rotor), sturdy steel cage inside - inertia about 50% less to one vape, and up to 70% less than series - improved lower load capacity, approx. +50% to Delta 21 Scope of delivery Ignition set RCT consisting of: - Stator - Rotor - 12V/100W DC controller - M20 ECU - Ignition coil - Mounting plate Note: A puller with left-hand thread is required for the RZT Delta