Addinol silicone spray, silicone oil - 500 ml

Addinol silicone spray is based on a modified silicone oil and solvent. Addinol silicone spray is physiologically harmless. The handling instructions in the safety data sheet when handling sprays must be observed. Performance: - Very good chemical resistance - Can be used in a very high temperature range - Resistant, effective and hydrophobic (water-repellent) - Very good compatibility with all common sealing materials - Very good sliding and separating capacity Application: ADDINOL silicone spray is as universal sliding and Release agent suitable for plastic, rubber and metal surfaces. After application, the product forms an odorless, water-resistant and weather-resistant lubricating film. The product has proven itself many times over by a good resistance to salt water, water vapor, sulfuric acid, diluted acids or alkalis. It offers high dielectric strength and a low loss factor regardless of humidity. Addinol silicone spray is applied as a thin film, is highly effective and very productive. Possible uses: lubricant in engine, body and vehicle construction; equipment in medicine, cosmetics and pharmaceutical industries; water-repellent lubricant in the electrical industry and in the installation trade; cleaning and protective agents in general mechanical, ship and aircraft construction; Preservatives in the ceramic and glass industry and V.A.M. Handling: Optimal use and storage temperature: +15°C to +25°C. Shake vigorously before use. Clean and dry surfaces thoroughly beforehand. Spray from a distance of approx. 20-30 cm and ensure that wets are completely. The exhaust time is about 30 seconds at room temperature. After drying, removal of the film is only possible with the help of acetone and water. Source: Addinol Lube Oil GmbH