Product information "Horn 6V with chrome holder - for Simson S50, S51, S70"

Horn 6V - Chrome-plated - Fastening to the middle of the housing - for mounting on the air filter box - incl. holder Note: The signal horn is preset from the factory and usually no longer needs to be adjusted. However, it can happen that you have to readjust the horn to adjust the pitch and volume. This adjustment is made using the lower adjusting screw between the two contact shoes. To do this, the signal horn must be operated at the same time. It is important to ensure that the lower adjustment screw is not pressed through the membrane, as this will damage it. Please do not work beyond the noticeable resistance, otherwise there will be a total failure. Please then again counter the adjustment screw to accept the settings.

Notes:

  • Chrome-plated parts give the vehicle a sophisticated look. However, the chrome parts require extensive care with suitable chrome care products several times a year to ensure a lasting shiny appearance. All sponges and cloths with a rough, scratchy surface and acidic, corrosive cleaners are unsuitable.
    Weather-related influences, especially the use of road salt in winter, quickly damage the chrome layer and promote rust formation.
    We would like to point out that we have to handle such complaints particularly restrictively.
    We recommend the use of stainless steel vehicle parts for motorbike owners who shy away from the high maintenance effort.

Customer ratings

Rate this product now and receive up to 135 bonus points.

In the menu item Ratings in your customer account, you will find all purchased products for which you can leave a rating. You can find more information about the review process here.

4.81/5, based on 297 ratings

88%
8%
3%
0%
1%

1 - 10 from 157 Ratings

Tobias

4.8
Qualität
Empfehlung
Preis- / Leistung
Erwartungen erfüllt
Stylische Hupe

Die Hupe sieht super aus in der Chrom-Optik. Leider ist sie noch etwas leise, liegt aber nicht am Produkt sondern an meiner Batterie. Empfehelnswert!

Is this review helpful?

0
0

Marc

5.0
Qualität
Empfehlung
Preis- / Leistung
Erwartungen erfüllt
Perfekt

Sieht richtig gut aus und macht ein schön klang, einfache Montage durch die Halterung. Falls kein Loch im herzkasten vorhanden ist. Dann einfach bohren und fertig.

Is this review helpful?

0
0

Luis

5.0
Qualität
Empfehlung
Preis- / Leistung
Erwartungen erfüllt
Hupe 6v Simson S51

Schnelle Lieferung und Einbau. Auch für Anfänger geeignet einfach Schraube fest machen, Kabel anstecken und los gehts.

Is this review helpful?

0
0

Lukas

5.0
Qualität
Empfehlung
Preis- / Leistung
Erwartungen erfüllt
super

einfache Montage, schön lauter Ton

Is this review helpful?

0
0

Hans

5.0
Qualität
Empfehlung
Preis- / Leistung
Erwartungen erfüllt
Top Hupe

Die Hupe bietet ein angenehmen klang, ist hochwertig verarbeitet und sieht zudem noch gut aus. Würde ich wieder kaufen.

Is this review helpful?

0
0

Denis

5.0
Qualität
Empfehlung
Preis- / Leistung
Erwartungen erfüllt
Gute Hupe für 6 VOLT

Da meine originale nicht mehr zu retten war, hab ich mich für diese entschieden als 6v Variante, kann locker mit der Lautstärke der originalen mithalten, das Chrom sieht auch gut aus und bei dem Preis kann man auch nicht meckern.

Is this review helpful?

0
0

Sven

5.0
Qualität
Empfehlung
Preis- / Leistung
Erwartungen erfüllt
wirkt hochwertig und funktioniert

Die Hupe macht einen hochwertig verarbeiteten Eindruck. Die Beschichtung ist gleichmäßig und ohne Fehler. Anbauen und anschließen und die Hupe funktionierte direkt, plug&play. So soll es sein. Der Preis ist super. Einen Kauf kann ich empfehlen.

Is this review helpful?

0
0

Fabian

4.5
Qualität
Empfehlung
Preis- / Leistung
Erwartungen erfüllt
Macht was es soll

Die Hupe hupt und sieht gut aus , gute Verarbeitung

Is this review helpful?

0
0

Kai

5.0
Qualität
Empfehlung
Preis- / Leistung
Erwartungen erfüllt
Hupe mit Halter

Top Produkt. Macht was es soll

Is this review helpful?

0
0

Christoph

5.0
Qualität
Empfehlung
Preis- / Leistung
Erwartungen erfüllt
Passt gut zur S50/51

Optisch ansprechend. Die optimale Klangeinstellung über das M3 Schräubchen + Kontermutter ist etwas Nervenaufreibend. Wenn die richtige Stellung gefunden ist, dann macht sie auch einen schönen Moped typischen Krach.

Is this review helpful?

0
0

Product details

Important features & properties

Merkmal
Material
Eigenschaft
Metall
Oberfläche
Eigenschaft
verchromt
Passend für Fahrzeughersteller
Eigenschaft
Simson
Passend für Fahrzeugtyp
Eigenschaft
S50 , S51 , S70
Primärfarbe
Eigenschaft
Chrom-farben
Sekundärfarbe
Eigenschaft
Chrom-farben
Voltzahl
Eigenschaft
6V

Exploded views "Horn 6V with chrome holder - for Simson S50, S51, S70"

Here you will find all the exploded views in which this product appears.
Manufacturer Drawing Position Open drawing
Simson
Model range
S-Reihe
Model
S50
Gehäusemittelteil - S50 N rechts 0 Open drawing
Simson
Model range
S-Reihe
Model
S51
Gehäusemittelteil - rechts 0 Open drawing
Simson
Model range
S-Reihe
Model
S51
Gehäusemittelteil - rechts - Elektronik-Ausführung 0 Open drawing
Simson
Model range
S-Reihe
Model
S70
Gehäusemittelteil - rechts - Elektronik-Ausführung 0 Open drawing
Simson
Model range
SR50-Reihe
Model
SR50
Elektronikausstattung 0 Open drawing

Downloads for Horn 6V with chrome holder - for Simson S50, S51, S70

Name Open drawing
Sicherheitshinweise 10001788 Download

Alternative Produkte